Work/Transport Modes; Transport Latches - Toro 02750 Operator's Manual

1.30
Work / Transport Modes
WARNING: PREVENT ACCIDENTS -
Ensure that the modes selected is appropriate to
the mode of operation of the machine.
Select 'work' mode when operating the mower in
conditions of poor traction when maximum tractive
performance is required. Selecting 'work' mode
will enable the use of the differential lock.
Select 'transport' mode when operating the mower
in conditions of good traction. For example when
travelling on the public highway or mowing large,
level, open areas. Selecting 'transport' mode in
these conditions will reduce transmission system
wear and tear.
Differential lock is not available for use when
'transport' mode is selected.

Transport Latches

WARNING: PREVENT ACCIDENTS -
ALWAYS raise the cutterheads to the transport
position and secure with the transport latches
and safety locks when travelling between work
areas.
Front and wing cutterhead transport latches:
Centre cutterhead transport latch:
WARNING: PREVENT ACCIDENTS -
Stored energy devices are charged when the
outer wing units are in the transport position.
Always operate the relevant lift controls to
provide hydraulic support for the cutterhead
suspensions before attempting to release the
transport latches.
OPERATING THE MOWER
1. Transport mode
2. Work mode
1.30
1
2