Specifications 1.21; Engine; Transmission System - Toro 02750 Operator's Manual

1.21
Specifications
ALL FIGURES ARE NOMINALLY QUOTED AT THE RATED ENGINE SPEED OF 2800 RPM
UNLESS OTHERWISE STATED.

Engine

Type:
Power Rating:
Capacity:
Air Cleaner:
Cooling System:
Battery:
Alternator:
Starter:
Cold Starting:
Idle Speed:
Fuel Type:
IMPORTANT - PREVENT DAMAGE: For further information regarding the engine, refer to the Engine
Manual.

Transmission System

Drive Type:
Pump:
Wheel Motors:
Differential Lock:
Drive:
Relief Valve Setting:
SPECIFICATIONS
T4240
Kubota V2203 Diesel
4 cylinders in line
35.3 kw (47.3 hp) @ 2800 rpm
DIN 70020
2197 cc (134 cu in)
Clean air drawn through a screened
air intake via a cyclonic air cleaner
with built in pre-cleaner.
Water cooled
12V 480 Amps S. A. E.
40 Amps
1.4 kw (1.6 hp) Electric
Glow plug
1250 (± 50) rpm
Diesel
Hydraulic
Variable displacement hydraulic piston pump with integral charge pump
servo assisted
Front Axle - 'twin lock' radial piston, fixed displacement, with integral disc
brake (pressure released)
Rear Axle - radial piston, fixed displacement
Electro - hydraulic control valve with pedal control (only available in 'work'
mode)
4WD in 'work' and 'transport' modes.
Main service relief 350 bar (5075 psi) differential
Charge pressure relief 29 bar (421 psi) differential
1.21