Toro 38547 Operator's Manual page 27

Problem
Snowthrower does not properly
clear the snow off the surface
Possible Causes
6. The auger/impeller drive belt is
loose or is off the pulley.
7. The auger/impeller drive belt is
worn or broken.
1. The tire pressure is low.
2. The skids and/or the scraper is
not properly adjusted.
27
Corrective Action
6. Install and/or adjust the
auger/impeller drive belt.
7. Replace the auger/impeller
drive belt.
1. Check the pressure in the tires
and adjust it if necessary.
2. Adjust the skids and the
scraper.