Operation; Adjust Discharge Opening; Operating Tips - Toro 08759 Operator's Manual

Operation

Adjust Discharge Opening

The discharge opening (Figure 5) is adjustable
to increase or decrease air output velocity and
volume. Decreasing discharge opening size will
increase velocity.
1. Loosen discharge opening deflector mounting
screws (Figure 5).
Figure 5
1. Discharge opening
deector
2. Pivot deflector to desired opening.
3. Tighten mounting screws.

Operating Tips

Discharged air has considerable force and
could cause injury or loss of footing.
• Stay away from discharge opening when
machine is operating.
• Keep bystanders away from discharge
opening when machine is running.
Practice blowing material. It is advisable to blow
the same direction the wind is blowing to prevent
material from blowing back into the cleared area.
1
2
G003812
2. Mounting screw
Note: If the attachment adapter becomes
stuck to the traction unit adapter, insert a
prybar/screwdriver into the pry slot to disengage
the parts (Figure 6).
Figure 6
1. Pry slot
8
1
G003783