Positioning The Seat; Unlatching The Seat; Changing The Seat Suspension; Using The Drive-Wheel Release Valves - Toro 74946 Operator's Manual

Positioning the Seat

The seat can move forward and backward. Position the seat
where you have the best control of the machine and are most
comfortable.
To adjust the seat, move the lever sideways to unlock seat
(Figure 33).
g019754

Unlatching the Seat

1. Seat latch
Figure 33
Figure 34
2. Seat

Changing the Seat Suspension

The seat adjusts to provide a smooth and comfortable ride.
Position the seat where you are most comfortable.
To adjust the seat, turn the knob in front either direction to
provide the best comfort
1. Seat-suspension knob
Using the Drive-Wheel Release
Valves
WARNING
Hands may become entangled in the rotating drive
components below the engine deck, which could
result in serious injury.
g019755
Stop the engine, remove the key, and wait for
all moving parts to stop before accessing the
drive-wheel release valves.
WARNING
The engine and hydraulic drive units can become
very hot. Touching a hot engine or hydraulic drive
units can cause severe burns.
Wait for the engine and hydraulic drive units to cool
completely before accessing the drive-wheel release
valves.
The drive-wheel release valves are located in the back of each
hydraulic drive unit, under the seat.
Note: Make sure that the release valves are in the fully
horizontal position when operating the machine or severe
damage to the hydraulic system can occur.
1. Disengage the blade-control switch (PTO) and
turn the ignition key to off. Move the levers to the
N
EUTRAL
Remove the key.
29
(Figure 35).
g019768
1
Figure 35
- position and apply the parking brake.
LOCK