Driving Forward Or Backward - Toro 74946 Operator's Manual

Driving Forward or Backward

The throttle control regulates the engine speed as measured
in rpm (revolutions per minute). Place the throttle control in
the M (front) position for best performance.
AXIMUM SPEED
Always operate in the full throttle position when mowing.
CAUTION
Machine can spin very rapidly. You may lose
control of machine and injure yourself or damage
the machine.
• Use caution when making turns.
• Slow the machine down before making sharp
turns.
Using the Motion-Control Levers
Figure 22
1. Motion-control
lever—N -
EUTRAL LOCK
position
2. Center, unlocked position
3. Forward
4. Backward
5. Front of machine
Driving Forward
Note: The engine shuts off if you move the traction-control
levers with the parking brake engaged.
To stop, pull the motion-control levers to the N
position.
1. Release the parking brake; refer to
Parking Brake (page
2. Move the levers to the center, unlocked position.
3. To go forward, slowly push the motion-control levers
forward (Figure
24
Releasing the
20).
23).
Figure 23
EUTRAL
G008952