Maintenance; Recommended Maintenance Schedule(S) - Toro 41179 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 8 hours
After the first 50 hours
Before each use or daily
Every 25 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 800 hours
Maintenance Procedure
• Torque the wheel lug nuts.
• Check the drive belt.
• Check the steering pump belt tension.
• Replace the hydraulic filter.
• Change the engine oil.
• Check pump dampener pressure.
• Clean the engine rotating screen.
• Check the engine oil.
• Check the tire pressure.
• Check pump dampener pressure.
• Clean the suction strainer. (more often when using wetable powders)
• Clean and oil the foam air cleaner (more often in dusty, dirty conditions).
• Lubricate the pump.
• Check the battery cable connections.
• Check the battery electrolyte level.
• Lubricate all grease fittings.
• Clean the engine rotating screen (more often in dusty, dirty conditions).
• Replace the paper air cleaner element (more often in dusty, dirty conditions).
• Change the engine oil, including synthetic oil (more often when operating under
heavy load or in high temperature).
• Replace the engine oil filter.
• Replace the fuel filter.
• Check the operation of the Neutral gear shift position.
• Torque the wheel lug nuts.
• Inspect the condition and wear of the tires.
• Check front wheel toe-in.
• Inspect the brakes.
• Check the steering pump belt tension.
• Change the spark plugs.
• Check the shift cables.
• Check the parking brake.
• Check the drive belt.
• Check the transaxle/hydraulic fluid.
• Inspect all hoses and connections for damage and proper attachment.
• Complete all yearly maintenance procedure specified in the engine operator's
manual.
• Inspect the fuel lines.
• Clean and lubricate the primary drive clutch.
• Inspect the pump diaphragm and replace if necessary. (see an Authorized Toro
Service Distributor)
• Inspect the pressure dampener bladder and replace if necessary. (see an Authorized
Toro Service Distributor)
• Inspect the pump check valves and replace if necessary. (see an Authorized Toro
Service Distributor)
• Change the pump drive gearbox fluid.
• Inspect the O-rings in the valve assemblies and replace them if necessary.
• Change the transaxle/hydraulic fluid and clean strainer.
• Replace the hydraulic filter.
36