SL1000
6.
Reinstall the CPU card into the 408M-A1 mother board, and close the CPU Support making sure
tab A locks into place.
7.
Cut and remove the Plastic Knockout for VoIP connector, then replace the Main-Cover and fasten
two screws.
Main-Cover
Hooks
Figure 2-95 Removing the Plastic Knockout and Replacing the Main-Cover
2-66
CPU card
408M-A1 at 1632M KSU
Figure 2-94 Installing the CPU Card
Plastic
Knockout
ISSUE 3.0
CPU support
Two screws
Installation