2
Checking the Tire Pressure
No Parts Required
Procedure
The tires are over inflated for shipping. Therefore, release
some of the air to reduce the pressure. The correct air
pressure is 103 kPa (15 psi) in the rear tires and 172 kPa (25
psi) in the caster wheels.
3
Checking Fluid Levels
No Parts Required
Procedure
1. Check the hydraulic fluid level before starting the
engine, refer to Checking the Hydraulic Fluid Level.
2. Check the engine oil level before and after starting the
engine, refer to Checking the Engine Oil Level.
3. Check the cooling system before starting the engine;
refer to Checking the Cooling System.
4
Reading the Manuals and
Viewing the Training Materials
Parts needed for this procedure:
1
Operator's Manual
1
Engine Operator's Manual
1
Parts Catalog
1
Operator Training Material
1
Engine warranty
Procedure
1. Read the manuals.
2. View the operator training materials.
Product Overview
1. Motion control lever
2. Seat
3. Seat belt
4. Parking brake lever
1. Ignition switch
2. Engine coolant
temperature warning
light
3. Glow plug light
4. Power take off (PTO)
Switch
15
Figure 5
5. Mower deck lift lever
6. Fuel cap (both sides)
7. Roll bar
8. Foot operated mower lift
pedal
Figure 6
5. Oil pressure warning light
6. Charge indicator light
7. Throttle lever
8. Hour meter