Table of Contents
Advertisement
•
To move straight rearward, slowly pull the
motion-control levers rearward
•
To turn, slow the machine by pulling back on both
levers and then push forward on the lever on the
opposite side from which you want to turn
23).
•
To stop, pull the motion-control levers to the
N
position.
EUTRAL
Note: The farther you move the motion-control levers
in either direction, the faster the machine moves in that
direction.
Figure 23
1. Motion-control
lever—N
-
EUTRAL
LOCK
position
2. Center, unlocked position
(Figure
23).
(Figure
3. Forward
4. Backward
Operating the Mower
Using the Deck-Lift Switch
The deck-lift switch raises and lowers the mower deck
24). The engine must be running for you to use this lever.
1. Deck-lift switch
•
To lower the mower deck, push the deck-lift switch down
(Figure
24).
Important: When you lower the mower deck, it sets
in a float/idle position.
•
To raise the mover deck, push the deck-lift switch up
(Figure
24).
Important: Do not continue to hold the switch up or
down after the mower has fully raised or lowered. Doing
so damages the hydraulic system.
26
G020873
Figure 24
(Figure
1
Advertisement
Table of Contents
