Instrumentation; Weight And Dimensions; Recommended Lubricants And Hydraulic Fluids; Cutterhead - Toro 02740 Operator's Manual

1.24

Instrumentation

Warning Lights:
Gauges:
Indicator Lights:

Weight and Dimensions

Wheel Base:
Working Width:
Cutting Width:
Transport Width:
Overall Length:
Overall Height:
Working Weight:

Recommended Lubricants and Hydraulic Fluids

Grease Points:
Engine:
Hydraulic System:
Ambient Temperature Range
0 - 30̊ C (32 - 86̊ F)
ISO viscosity grade
46 hydraulic oil
Should you be in any doubt please contact your TORO dealer. Using incorrect grades will cause premature wear
of hydraulic components and invalidate warranty.

Cutterhead

Cutting Width:
Cylinder Diameter:
Cylinder Speed:
Height of Cut:
Number of Blades:
Smooth Rear Roller:
Smooth Front Roller:
Grooved Front Roller:
Configuration:
SPECIFICATIONS
Engine oil pressure
Battery charge
Engine coolant temperature
Hydraulic transmission oil temperature
Digital hour meter
Fuel level
Hydraulic oil level sight glass
Engine pre-heat
Hydraulic return filter blocked
Hydraulic transmission filter blocked
Cutterhead drive switch off
Parking brake engaged
Transmission neutral
1440 mm (56.7˝)
2300 mm (90.6˝)
2120 mm (83.5˝)
1575 mm (58˝) at 13mm (.5˝) height of cut
2710 mm (107˝)
1770 mm (69.7˝) with R.O.P.S folded
2424 mm (95.4˝) with R.O.P.S in its vertical operating position
Including 2 post R.O.P.S, 8˝ 6 blade cutterheads and full tank of fuel. It
excludes the operator and any other options.
1317 kg (2903 lb)
A good quality medium grease
Refer to Engine Operators Manual
15 - 40̊ C (59 - 104̊ F)
ISO viscosity grade
68 hydraulic oil
MK3 200 mm Cutterhead
762 mm (30˝)
200 mm (8˝)
1050 rpm approx
12 mm (.5˝) to 80 mm (3˝)
4, 6, 8, 10
Standard
Optional
Optional
Fixed/Floating
1.24
MK3 254 mm Cutterhead
762 mm (30˝)
254 mm (10˝)
1050 rpm approx
12 mm (.5˝) to 80 mm (3˝)
4, 6, 8
Standard
-
-
Fixed