Safety Decals and Instructions
Safety decals and instructions are easily visible to the operator and are located near any
area of potential danger. Replace any decal that is damaged or lost. Decals with Tecumseh
part numbers must be obtained from Tecumseh Products Company. Decals with Toro part
numbers must be obtained from The Toro Company.
On Control Panel
(Toro Part No. 95-2698)
On Auger Housing
(Toro Part No. 53-7670)
On Discharge Chute
(Toro Part No. 94-8079)
Assembly
Note: Determine the left and right sides of the snowthrower by standing in the normal operating position.
Loose Parts
Part
Handles
Capscrews and curved washers
Cotter pin
S[eed selector rod
Flat washer
Next to Primer
(Tecumseh Part No. 36501)
On Chute Control Bracket
(Toro Part No. 63-3510)
824
Electric Start
On Control Panel
(Toro Part No. 100-3341)
Qty
2
Installing the handle
4
1
1
Installing the speed selector rod
Installing the speed selector rod
1
6
On Engine
(Tecumseh Part No. 35077)
On Engine
(Tecumseh Part No. 37119)
TM
8 HP 24"
Use