Operating The Throttle; Operating The Ignition Switch; Using The Fuel Shut-Off Valve - Toro 74939 Operator's Manual

Operating the Throttle

The throttle control can be moved between the Fast and
Slow positions (Figure 15).
Always use the Fast position when turning on the mower
deck with the blade control switch (PTO).
G008946
Figure 15

Operating the Ignition Switch

1. Turn the ignition key to the Start position (Figure 16).
When the engines starts, release the key.
Important: Do not engage starter for more than 5
seconds at a time. If the engine fails to start allow
a 15 second cool-down period between attempts.
Failure to follow these instructions can burn out
the starter motor.
Note: Additional starting cycles may be required
when starting the engine for the first time after the fuel
system has been without fuel completely.
2. Turn the ignition key to the stop position to stop the
engine.

Using the Fuel Shut-off Valve

The fuel shut-off valve is located under the seat. Move the
seat forward to access it.
Note: Close the fuel shut-off valve for transport,
maintenance, and storage.
Note: Ensure that the fuel shut-off valve is open when
starting the engine.
19
G008947
Figure 16