Maintenance; Recommended Maintenance Schedule - Toro 03540 Operator's Manual

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.
Important
Refer to your engine operator's manual for additional maintenance procedures.

Recommended Maintenance Schedule

Maintenance Service
Interval
After first 10 hours
After first 50 hours
Every 50 hours
Every 100 hours
Every 200 hours
Every 400 hours
Every 800 hours
Every 1600 hours or 2
years, whichever occurs
first
Maintenance Procedure
Check the fan and alternator belt tension.
Torque the wheel lug nuts.
Change the transmission fluid.
Replace the transmission filter.
Replace the engine oil filter.
Check the engine RPM (idle and full throttle).
Check the battery fluid level.
Check the battery cable connections.
Lubricate all grease fittings.
Change the engine oil.
Inspect the air filter, dust cup, and baffle.
Check the fan and alternator belt tension.
Replace the engine oil filter.
Inspect the cooling system hoses.
Torque the wheel lug nuts.
Drain moisture from the hydraulic tank.
Drain moisture from the fuel tank.
Check the reel bearing preload.
Lubricate the front axle bearings.
Service the air cleaner (when the indicator shows red).
Replace the fuel/water separator filter.
Replace the fuel filter.
Inspect the traction linkage movement.
Check the engine RPM (idle and full throttle).
Change the hydraulic filter.
Change the transmission fluid.
Replace the transmission filter.
Check rear wheel toe-in.
Pack the bearings to both rear wheels (2WD).
Change the rear axle lubricant (4WD).
Adjust the valves (Kubota diesel engine).
Replace all moving hoses.
Replace the interlock safety switches.
Flush/replace the cooling system fluid.
Drain/flush the fuel tank.
Drain/flush the hydraulic tank.
30