Product Overview; Controls - Toro 22323 Operator's Manual

Product Overview

1. Road wheels
2. Track
3. Lift cylinder
4. Loader arms
5. Hood
6. Auxiliary hydraulic
couplers
Figure 3
7. Mount plate
8. Reverse safety plate
9. Control panel
10. Tie-down/lift loop
11. Rear access cover

Controls

Become familiar with all the controls (Figure 4) before
you start the engine and operate the traction unit.
1 2 3
G005406
1. Auxiliary hydraulics lever
2. Key switch
3. Hour meter
4. Fuel gauge
5. Indicator lights and glow
plug switch
6. Throttle lever
Key Switch
The key switch, used to start and stop the engine, has
three positions: off, run, and start.
To start the engine, rotate the key to the start position.
Release the key when engine starts and it will move
automatically to the run position.
To stop the engine, rotate the key to the off position.
Throttle Lever
Move the control forward to increase the engine speed
and rearward to decrease speed.
Reference Bar
When driving the traction unit, use the reference bar as
a handle and a leverage point for controlling the traction
control and the auxiliary hydraulics lever. To ensure
smooth, controlled operation, do not take both hands
off of the reference bar while operating the traction unit.
12
4 5 6 7 8
10 9 1 1
Figure 4
7. Loader arm/attachment tilt
lever
8. Parking brake lever
9. Reference bar
10. Traction control
11. Loader valve lock