Transporting The Sprayer; Towing The Sprayer - Toro 41198 Multi-Pro 1250 Operator's Manual

Figure 31
1. Pump
2. Grease fitting
Adjusting the Air Pressure in
Dampener
The air pressure in the dampener on the pump is set at
15 psi (1 bar) by the manufacturer. The recommended
pressure in the dampener is 1/3 of the spraying
pressure. If using a spray pressure greater than 45 psi
(3.1 bar) adjust the dampener accordingly.
Figure 32

Transporting the Sprayer

For moving the sprayer long distances, use a trailer.
Secure the sprayer to the trailer. Figure 33 illustrates
the front tie-down points.
3. Pressure dampener
G010597
1. Tie down points
The rear tie-down points are two steel loops under the
back of the frame just in front of the adjustable boom
frame.

Towing the Sprayer

In case of an emergency, the sprayer can be towed for
a short distance. However, we do not recommend this
as a standard procedure.
WARNING
Towing at excessive speeds could cause a loss of
steering control, resulting in personal injury.
Never tow the sprayer faster than 5 mph (8 kph).
Towing the sprayer is a two person job. If the machine
must be moved a considerable distance, transport it on
a truck or trailer; refer to Transporting the Sprayer.
1. Affix a tow line to the frame.
2. Put the range selector in the Neutral position and
release the parking brake.
3. Tow the sprayer at less than 5 mph (8 kph).
36
Figure 33