Setup - Toro 30722 Groundsmaster 300 Operator's Manual

Setup

Note: Determine the left and right sides of the machine from the normal operating position.
Note: Use this chart as a checklist to ensure that all parts necessary for assembly have been shipped. Without any of these
parts, total setup cannot be completed.
Description
Large castor wheel assembly
Small castor wheel assembly
Belly shield
Belly shield hook
Locknut, 5/16 in.
Belly shield hanger
Capscrew, 3/8 x 1-1/4 in.
Nut
Hairpin cotter
Clevis pin, 3/8 x 1-7/8 in.
Belly shield spacer (Diesel only)
Capscrew, 7/16 x 3 in.
Flat washer, 7/16 in.
Nut, 7/16 in.
Flat washer, 7/16 in.
Capscrew, 7/16 x 3 in.
Nut, 7/16 in.
PTO shaft
Capscrew, 5/16 x 1-3/4 in.
Locknut, 5/16 in.
Roll pin, 3/16 x 1-1/2 in.
Declaration of Conformity
EEC 105 decal
Parts Catalog
Operator's manual
Qty. Use
2
Installing the castor wheel assembly
2
1
2
4
2
2 Installing the belly shield (Model 30710 only)
2
2
2
2
2
Connecting the right-hand push arm to the
2
cutting unit
2
2
Connecting the left-hand push arm to the
2
cutting unit
2
1
2
Connecting the PTO shaft
2
2
1 Model 30722 & 30710 TE only
1
1
1 Read before operating the machine.
8