Configuring Network Settings - Canon EOS-1D X Instruction Manual

Configuring Network Settings

[Auto setting]
Settings otherwise configured with [Manual setting] can be

configured automatically. However, in environments using DHCP
servers or routers supporting DHCP server functions, the IP address
and similar settings must be assigned and configured automatically.
If an error is displayed, select [Manual setting] regardless of
whether the IP address and similar settings are automatically
assigned and configured.
[Manual setting]
The [IP address set.] screen is displayed
after you select [Manual setting]. If [Auto
assign] results in an error, select [Manual
setting]. The IP address you enter must be
the IP address assigned to the camera.
Enter the [IP address], [Subnet mask],
[Gateway], and [DNS address] on each
screen as they are displayed.
If you are not sure what to enter, see page 97, "Checking Network
Settings," or ask the network administrator or another person
knowledgeable about the network.
When entering numbers for the IP

address, subnet mask, and so on, press
<0> to move the input position and turn
the <5> dial to enter the number.
Turn the <5> dial to select a

configuration method for the network
settings, and then press <0>.
Select [OK] and press <0> to go to

the next screen.
17