Configuring Eos Utility Communication Settings - Canon EOS-1D X Instruction Manual

Configuring EOS Utility Communication Settings

These instructions are continued from Chapter 1.
With EOS Utility, you can use Pairing Software (EOS software) to
establish a connection between the camera and a computer.
Pairing Software is installed automatically with EOS Utility.
The configuration procedure below uses Windows 8.1 as an example.
Users of EOS Utility Ver. 2.13 or Earlier in Windows
Perform the operations below initially. If these operations are not performed,
Pairing Software may not start.
Open the [C Drive]  [Program Files]  [Canon]  [EOS Utility] 
[WFTPairing] folder (in this order), and then double-click the [WFT
FirewallSettings] icon.
* This folder name is only an example. The folder where files are saved
varies depending on the computer environment used.
Users of EOS Utility Ver. 2.13 or earlier: Go to step 3.
44
Start EOS Utility on the computer.
1
In EOS Utility, click [Pairing over
2
Wi-Fi/LAN].
Select [Yes] if a message is displayed

regarding the firewall.