Canon VB-C500VD Start Manual page 64

Step 4 Install the Camera
Wiring on a Ceiling
Cut out the side face of the cable cover with the V-shaped groove. Guide the interface cables
out towards the side face of the camera, and affix the cable cover with a screw.
Power interface
cable
Audio interface cable
Connect each interface cable to its dedicated terminal and affix it into its specified
groove, as shown below.
At this time, make sure the heat-shrinkable tubes that protect the cables rest properly
in front of the affixing grooves.
If the cable is not properly installed, it may come off and cause the camera to
malfunction.
Affixing groove for cable
2-22
Cut out the
V-shaped groove.
I/O interface cable
Note
Heat-shrinkable tube
for cable protection
Affixing groove for cable
Power
Interface cable fixing method
Cut out the side face of the cover.
Affixing groove for cable
Audio I/O