Canon VB-C500VD Start Manual page 59

2. Remove the dome case.
VB-C500VD
Loosen the three dome case lock screws using the bundled dome case lock screw wrench.
VB-C500D
Loosen the two dome case lock screws on the side face of the camera. Loosen the screws
until they are sticking out.
VB - C500VD
Dome case lock screw wrench
Dome case lock screw
Note
When removing the dome case, be careful not to scratch or dirty the dome.
3. To connect various interface cables (audio, I/O, power), remove the cable cover at the bottom
of the camera.
* The figure shows VB-C500D.
Step 4 Install the Camera
VB - C500D
Dome case lock screw
2-17