Canon VB-C500VD Start Manual page 54

Hide thumbs Also See for VB-C500VD:

Table of Contents

Step 3 Perform Initial Setting of the Camera

Note

To obtain an IP address from the DHCP server, first you need to set an address using VB

Initial Setting Tool, which enables to communicate with the PC for setting. Then, change the

[IP Address Setting] for LAN to [Auto (DHCP)] in [Network] in the Setting page. See "LAN"

(

Operation Guide).

The camera will stop issuing IP address assignment requests in 20 minutes after its power

is turned on, upon which detection by VB Initial Setting Tool will be disabled. In this case,

turn on the camera again.

2-12

This completes the initial setting.

Table of Contents

Vb-c500d