Cub Cadet Time Saver Operator's Manual page 19

9. Peel the backing off of the self-adhesive foam strip (721-
04388) that has been included with your grass collector.
Apply it to the upper chute, flush against the flange as
shown in Fig. 5-13.
Flange
Figure 5-13
10. With the grass catcher cover open, install the discharge
chute over the chute extension tube, as seen in Fig. 5-14,
and rest the top end into the upper chute support installed
on the right-hand side of the bag support assembly. See
Fig. 5-15.
Note: The groove on the upper chute should be aligned
with the upper chute support, as seen in the inset of Fig.
5-15.
s 5 — b a
ectiOn agger sseMbly
Figure 5-14
Figure 5-15
& i : t u b
nstallatiOn win pper
c 19
agger OMpOnents