Nokia RX-44 Service Manual page 69

RX-44
Service Software Instructions
• Bluetooth connectivity settings
• browser settings
• installed applications
To restore data, do the following:
a Select the desired backup and restore
b In Select data for backup, select data types to restore
Format internal or external memory card
Data from internal and external memory card can be cleared with the Format utility of the device.
To view and manage the contents of a memory card, select Utilities > File manager and the desired
memory card from the folder list.
To format a memory card in file manager, push the menu button (or menu icon in the upper left corner
of the display).
Select Tools > Format memory card.
All data is permanently deleted.
Clear device – make refurbishment
To clear the device select Applications > Settings > Control panel. Push menu button (or menu icon in
the upper left corner of the display). Select Tools > Clear device > > enter the lock code of the device,
and tap OK to clear the data. Default lock code is 12345.
All content of device and internal 2 GB memory will be deleted. All applications will be closed and the
device will restart. Push ok to start.
6. Press Start to flash the product. Wait until you are notified that flashing has been successful. The procedure
will take a couple of minutes. If the connection is NFPD USB (FBUS), then the USB led (green) should be
blinking during flashing. If the connection is NFPD TCP, then the LAN led (yellow) should be blinking. The
MODE2 is blinking, when the file is loaded to the FPS-10 flash prommer. See the flash progress also from
the Firmware Update dialog.
7. After flashing successfully, click the Close button to close the Firmware Update dialog.
Issue 1 COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Page 3 –29