Nokia RX-44 Service Manual page 57

RX-44
Service Software Instructions
4. Click New to add a new connection. Pressing New starts the Connection Wizard. You can also create
a connection manually with the Connection Wizard (see step 3).
The wizard will automatically try to configure the connection. Please note that this may take a
considerable amount of time because Phoenix will go through all connections on the PC.
5. Select Nokia flash programming device, if you want to create a connection for prommer. Select JBL-9 /
Generic FBUS, if you need a connection for DAU-9S cable.
Issue 1 COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Page 3 –17