Wlan Functionality Test - Nokia RX-44 Service Manual

RX-44
RF Troubleshooting and Tuning
2. Antenna is pointing straight up (see figure 9). Place SB-7 on working surface so that there is at least 20cm
free space around it.

WLAN functionality test

Context
Connect power cable and antenna to SB-7. Wait for 3 minutes to be sure that SB-7 is fully up and running.
Steps
1. Attach RX-44 with CU4/SS-62 + FS-66 and place on top of the WLAN Test Box at the correct place as explained
in WLAN functionality testing using SB-7 WLAN test BOX with RX-44.
2. Make connection to RX-44 with Phoenix (test mode).
3. Choose Testing -> WLAN Configuration.
4. Write "default" into 'Network SSID to scan' field.
5. Press Scan.
Issue 1
Figure 35 Placement of RX-44 on SB-7
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Page 5 –17