Do you have a question about the MT-1020 and is the answer not in the manual?
Questions and answers
Alain Bergeron
January 19, 2025
I would like to replace the pulp collector due to the safety pin is broken
Alain Bergeron
January 19, 2025
I would also like to replace the spout. I took it apart to clean it and can’t put it back together!
1 comments:
Mr. Anderson
February 4, 2025
To replace the spout on Jack LaLanne's MT-1020:
1. Remove the Spout: - Locate the removable juice spout locking mechanism on the bottom side of the receptacle. - Turn the locking mechanism counterclockwise to unlock it, aligning the notch with the juicer spout hinge pivot arm. - Carefully lift the juice spout from the receptacle and remove it for cleaning or replacement.
2. Reattach the Spout: - Insert the juice spout back into its original position. - Turn the locking mechanism clockwise to lock it securely in place. - Ensure the juice spout is in the locked position and tightly secured before using the juicer.
This answer is automatically generated
Melchora Korb
February 5, 2025
I used my juicer but couldn’t separate the filter from the juicer to clean it? Please help?
Melchora Korb
February 5, 2025
How can I separate the filter from the machine to clean it? I need help?
RAMESHARAN SELVANAYAGAM
March 17, 2025
I **** looking for replacement spout for
Mt 1020-1
Need help?
Do you have a question about the MT-1020 and is the answer not in the manual?
Questions and answers
I would like to replace the pulp collector due to the safety pin is broken
I would also like to replace the spout. I took it apart to clean it and can’t put it back together!
To replace the spout on Jack LaLanne's MT-1020:
1. Remove the Spout:
- Locate the removable juice spout locking mechanism on the bottom side of the receptacle.
- Turn the locking mechanism counterclockwise to unlock it, aligning the notch with the juicer spout hinge pivot arm.
- Carefully lift the juice spout from the receptacle and remove it for cleaning or replacement.
2. Reattach the Spout:
- Insert the juice spout back into its original position.
- Turn the locking mechanism clockwise to lock it securely in place.
- Ensure the juice spout is in the locked position and tightly secured before using the juicer.
This answer is automatically generated
I used my juicer but couldn’t separate the filter from the juicer to clean it? Please help?
How can I separate the filter from the machine to clean it? I need help?
I **** looking for replacement spout for Mt 1020-1