• Do not let power cord hang over the edge of table, counter, or let cord touch Cleaning Your Power Juicer hot surfaces such as stoves. • To reduce the risk of injury, never place blade on base without properly assembling the unit.
Power Juicer cools down. Afterwards, the unit will continue to work again normally. In the event the Power Juicer is jammed the motor may shut down. If this occurs the juicer should be shut off and unplugged. The unit should be thoroughly cleaned to remove the obstruction.
ASSEMBLY ASSEMBLY (CONT.) Assemble as shown STEP 4: STEP 1: Place blade inside filter, centered Base over screw peg. Using orange Blade Place base on a dry flat surface with crescent tool, place its pegs locking bar in down position as shown. Filter into the holes in the blade In front of the machine (spout side).
Receptacle Base Locking Bar Pulp Guard CLEANING YOUR POWER JUICER STEP 4: Use the crescent tool (orange) to remove the blade. Place the two pegs • Turn off the power switch and wait until the motor completely stops. at either end of the crescent tool into •...
CT residents add 6% sales tax. NY & NV add applicable sales tax.) E-mail ____________________________________________________ U.S. CURRENCY ONLY PRICES SUBJECT TO CHANGE Please make checks payable to: POWER JUICER Mail Payment Today To: POWER JUICER 26 Barnes Industrial Rd. North, P.O. Box 3125, Dept. PJ999, Wallingford, CT 06494...
Need help?
Do you have a question about the Power Juicer and is the answer not in the manual?
Questions and answers