Table of Contents
Advertisement
Fruits and Vegetables: Containing a Large Juice Content
Apples
Cantaloupe
Celery
Clementines
Cranberries
Cucumber
Some fruits and vegetables cannot be juiced due to their inability to produce
juice. Although they are unable to be juiced, that does not mean we should not
enjoy them on a daily basis as part of a healthy diet. Examples are: avocado,
banana, and coconut.
Never use the green tops of rhubarb. Oxalic acid is toxic in the leaves. There are
so many other healthy fruits and vegetables available that it's just easier and
safer to skip rhubarb as a juice source.
CLEANING YOUR JUICER
We have made juicer clean up as easy as possible. All of the components,
with exception of the motor base, can be put in your home dishwasher.
We recommend top rack placement as temperatures near the bottom drying
element may vary with manufacturer.
Caution: Some commercial and foreign made dishwashers may reach internal
temperatures that are higher than machines made for home use by U.S.
standards. Do not use these dishwashers with your Power Juicer. The higher
temperatures may cause damage to your juicer. Check with your dishwasher
manufacturer before using.
For easiest clean up, we recommend you rinse/clean your Power Juicer
immediately after juicing. This will help prevent fruit/vegetable fibers from
hardening on the components, making it more difficult to clean.
• Turn off the power switch and wait until the motor completely stops.
• With dry hands, unplug the AC cord from electrical outlet.
• Disassemble the machine. (See disassembly instructions pages 6-7.)
Grapefruits
Grapes
Honeydew Melon
Lemon
Lime
Oranges
DO NOT JUICE
16
Peppers
Pineapple
Tangerines
Tomatoes
Watermelon
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MT-1020 and is the answer not in the manual?
Questions and answers
I would like to replace the pulp collector due to the safety pin is broken
I would also like to replace the spout. I took it apart to clean it and can’t put it back together!
To replace the spout on Jack LaLanne's MT-1020:
1. Remove the Spout:
- Locate the removable juice spout locking mechanism on the bottom side of the receptacle.
- Turn the locking mechanism counterclockwise to unlock it, aligning the notch with the juicer spout hinge pivot arm.
- Carefully lift the juice spout from the receptacle and remove it for cleaning or replacement.
2. Reattach the Spout:
- Insert the juice spout back into its original position.
- Turn the locking mechanism clockwise to lock it securely in place.
- Ensure the juice spout is in the locked position and tightly secured before using the juicer.
This answer is automatically generated
I used my juicer but couldn’t separate the filter from the juicer to clean it? Please help?
How can I separate the filter from the machine to clean it? I need help?
I **** looking for replacement spout for Mt 1020-1