Installing Speakers On Tallboy Stands - Samsung HT-J7750W User Manual

Connections
Installing the Speakers on the Tallboy Stands
1. Find the speaker cable that is attached to the Stand.
Turn the Stand and Stand Base upside-down, unravel
the speaker cable, and then draw it through the hole in
the Stand Base.
✎
Handle the Stand carefully. It is heavy.
2. Connect the Stand Base to the bottom of the Stand.
3. Insert three 5x20 screws into the marked holes in the
Stand Base, and then tighten them with a screwdriver as
shown in the illustration.
4. Place the speaker cable into the slot on the bottom of
the stand base.
5. Connect the assembled stand and a speaker together
by matching the labels on the stand and speaker with
each other as shown in the picture.
6. Insert a screw (5x20) into the hole on the rear of the
speaker and tighten by turning it clockwise with a
screwdriver.
7. Repeat steps 1 through 6 with the other speaker and
stand.
Speaker Cable Connections
1. Match each speaker cable bundle to the correct speaker by matching the coloured band on each bundle
to the coloured sticker on the bottom or back of each speaker.
2. Connect the speaker wire plugs from each speaker to the back of the product by matching the coloured
band on each cable to the colours of the speaker jacks. When connecting, make sure to match label
colour on the back of speaker.
Wireless Receiver Module
Surround Speaker (L)
Front Top/
Front Speaker (R)
L R
SURROUND SPEAKERS OUT
ID SET
Surround Speaker (R)
10
1
3
5
Speaker
Stand
Front Speaker (L)
FRONT TOP FRONT TOP
R
FRONT FRONT
R
SUBWOOFER CENTER
SPEAKERS OUT
Subwoofer
FRONT TOP R FRONT TOP L
FRONT FRONT
R L
SUBWOOFER CENTER
SPEAKERS OUT
- English
2 Stand Base
Stand
4
6
Front Top/
L
L
Centre Speaker
1
HDMI OUT