Samsung np-q1ex User Manual page 171

Bluetooth
The Korean or Chinese characters
Q
in a business card received via
Bluetooth are broken.
A1 If you send a business card including
Korean or Chinese characters by
selecting a Select a business card
in the file (*.vcf, *.vcd) option, the
characters on the received card will
be broken.
This is because the contents of
the business card file are not set
to Korean or Chinese characters
(CHARSET). To resolve this problem,
edit the contents of the business card
file manually as follows.
z Right-click over a business card
file (*.vcf, *.vcd) to be sent and
select Connect Program > Select
Program.
x Select Notepad from the program list.
c Edit the file as follows.
Example) "N:Magic Sens" =>
"N;CHARSET=KS_C_5601:Magic
Sens"
For Korean, add "CHARSET=KS_C_
5601"
For Chinese Simplified (CHS), add
"CHARSET=gb2312"
For Chinese Traditional (CHT), add
"CHARSET=Big5"
A2 Perform Send business card
immediately in the Address Book
of Microsoft Outlook or select
Transmission by Outlook business
card selection, and you will be able
to transmit a business card without
broken characters and without editing
the VCF file.
When no headset is found or
Q
cannot be connected.
A1 If the headset is already connected to
another device, you will not be able to
find the headset and cannot connect
to the headset even if the headset is
found. Disconnect the connection to
the other device and then start the
search again.
A2 If the headset is connected to a power
adapter, you cannot make a Bluetooth
connection.
Disconnect the power adapter and
then retry.
A3 In general, a Bluetooth headset has 2
operating modes, On/Off mode and
Pairing mode.
171