Samsung np-q1ex User Manual page 154

Using Samsung Recovery Solution
Not only can you use Samsung Recovery Solution when Windows is running, but
also when you are unable to boot up into Windows. Let's learn how to use Samsung
Recovery Solution.
Initial Status Backup
If you turn your computer on for the first
time, the Initial Status Backup function
is performed after registering Windows.
This function saves an image of the Initial
Status of the C drive to a secure location
so that users can restore the computer
to the Initial Status using the Complete
Restore function. An Initial Status Backup
is only performed once immediately after
the computer is purchased.
1
If you turn the power on for the first
time, the Register Windows screen
appears. If you register Windows
according to the instructions on the
screen, the computer will be restarted.
2
When the computer has been
restarted, the User Registration
Complete message appears. Click
OK. The computer will restart.
3
The Initial Status Backup screen
appears.
To resize the C and D drives, click
Advanced and partition the disk
accordingly. Adjust the partition size
using the slide bar and then click
Next.
The partition disk function is only
available when the computer is
turned on for the first time and will
not be available afterwards. Once
you have completed the partitions,
you cannot resize the partitions.
Therefore partition the disk carefully.
4
The Initial Status Backup is performed
to backup the initial status of the
C drive to a secure location. This
backup image is used for the
Complete Restore function that
restores your computer to the initial
status when the computer is not
working properly.
5
When the Initial Status Backup is
complete, restart Windows.
154