Samsung np-q1ex User Manual page 169

For more information on the AP
settings, see the owner's manual
supplied with the AP.
Although a connection has been
Q
established, I cannot connect to the
Internet.
 Check the TCP/IP settings.
A If you cannot connect to the Internet
but you are connected to an AP, check
if the TCP/IP settings are configured
properly.
When you are not connected to an AP,
an X mark appears over the 'Wireless
Network Connections' icon
Taskbar. If you double-click the icon,
the Search for Wireless Connections
window appears. Reconnect to a
wireless network referring to the
descriptions of Connecting to a
Wireless LAN in the Using the
Network section.
When you are connected to an AP, an
X mark appears over the "Wireless
Network Connections" icon
Taskbar. Double-click the icon and
check if the IP address is properly
allocated on the Support tab. If the IP
address is not properly allocated, the
IP address will be displayed as follows;
(for example, 169.254.xxx.xxx).
If your network does not support
DHCP, you have to manually configure
an IP address by asking your network
administrator.
In addition, even if your network
supports DHCP, the Internet
connection may not be available if the
DHCP server fails to allocate an IP
address to your computer.
I have configured both wired and
Q
wireless connections with the
same IP address, but the network
connections do not work properly.
A You cannot use the same IP address
in the
for wired and wireless connections. To
use only one IP address for both wired
and wireless connections, you must
disable one of them according to your
requirements in Network Connections
in the Control Panel.
in the
169