Panasonic KX-TDA100 Pc Programming Manual page 763

Maintenance Console Location
2.17.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
1.1.1.2 Direct In Line (DIL)
2.2.3 Tenant Service
2.2.4 Time Service
VM Trunk Group No.
Specifies the number of the VM trunk group sent to the VPS when the DIL destination is the floating
extension number of a VM (DPT) Group.
The VM trunk group number is used to allow the VPS to send the applicable greeting message to the
caller.
Value Range
1–48
Maintenance Console Location
2.17.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Guide References
1.1.1.2 Direct In Line (DIL)
1.24.3 Voice Mail DPT (Digital) Integration
CLI for DIL
When CLI distribution is enabled for a trunk to which DIL distribution is set, incoming trunk calls will
be distributed to the CLI destinations (instead of the DIL destinations) if the caller's identification
number is found in the System Speed Dialling Table.
CLI distribution can be enabled or disabled for each time mode (day/lunch/break/night) on a trunk
basis.
Shelf (KX-TDA600 only)
Indicates the shelf position (reference only).
Value Range
Shelf number
Maintenance Console Location
2.17.2 [10-2] DIL Table & Port Settings
2.17 [10] CO & Incoming Call
PC Programming Manual 763