Start Menu-Open - Panasonic KX-TDA100 Pc Programming Manual

2.2.2 Start Menu—Open
Opens a system data file previously saved on the PC, and enters Batch mode.
When opening a file created with an older version of the Maintenance Console, you will be asked
whether you want to convert the data for use with the current version or not. Using the data without
converting may result in some data being loaded to an incorrect destination, and is not
recommended.
If the file is not supported by the PBX (e.g. a system data file from an incompatible PBX), it will not
be opened. The only files that can be opened are files that were created by the Maintenance Console
for a supported PBX.
To upload a file opened here to the SD memory card installed in the PBX, see 2.6.2 Utility—File
Transfer PC to PBX (SD Card).
To open a system data file
1.
From the start menu, select Open.
The Open dialogue box will be displayed.
2.
Navigate to the folder containing the system data file you want to open.
3.
Select the file.
4.
Click Open.
If the file was created with an older version of the Maintenance Console, you will be asked if you
want to convert the data.
• Click Yes to convert the data for use with the current version of the Maintenance Console.
Enter a name for the new converted system file.
• Click No to open the file as it is.
2.2 Start Menu
PC Programming Manual 39