NEC Univerge SV9100 Installation Manual page 49

Users now have to be created to allow them to use call control features, in Configure / Organisation,
click create new user. When creating users, at least one PBX Administrator should be created, this
will allow a nominated user to carry out administrative functions. Enter a name for the user, set the
User Role as required and select Advanced or Basic from the Call Control drop down menu.
Advanced users are normal MyCalls desktop users, Basic users are for MyCalls desktop Lite. Users
can be enabled for Hot Desking, by turning this feature on, it allows a user to select which extension
they will logon to when they first logon to MyCalls. If a user is not enabled for Hot Desking then the
user must be assigned to an extension.
Users that use the same extension or are not enabled for Hot Desking should be assigned to an
extension. When users are assigned to an extension that are enabled for Hot Desking, they will be
offered to login to their default extension. To assign a user to an extension, select Configure /
Telephone System / PBX / Devices / Extensions / Create or Edit Extensions and then click the edit
button against the extension. Then click the select button next to Default User and in the select user
window, type part of the users name in the top left box and select the user. Click OK and the user is
assigned to the extension.
Repeat this procedure for each user that will need creating. Users can be created 'en-masse' if there
are several users to create, this can be achieved using the config import tool. Details of how to do
this are shows in the Using the Config Import Tool section of this manual.
49 | P a g e