NEC Univerge SV9100 Installation Manual page 13

The table below explains all of the commands that are set in the SV9100 by the configuration import
tool.
PRG Cmd Easy Edit Command
10-20 Device 1 Applications / MyCalls / General
10-20 Device 2 Applications / MyCalls / General
10-20 Device 5 Applications / MyCalls / General
10-20 Device 10 Applications / MyCalls / General
System Numbering Plan / Service
11-16-09
Codes / Single Digit Code
41-01-03 -
41-01-05 -
Additional Devices / SMDR / Setup /
35-01
SMDR Service Options
Additional Devices / SMDR / Setup /
35-02
SMDR Output Options
Additional Devices / SMDR / Setup /
14-01-06
SMDR Output for Trunks
20-11-11 COS / Automatic On-Hook Transfer
Additional Devices / SMDR / Setup /
15-01-03
SMDR Output for Extensions
Additional Devices / SMDR / Setup /
15-01-14
SMDR Output for Extensions
Additional Devices / SMDR / Setup /
15-01-15
SMDR Output for Extensions
Once the SV9100 is configured and ready for MyCalls the the config import tool will be populated.
Click OK when prompted.
Value Description / Purpose
8181 Set CTI Port for MyCalls Desktop
4000 Set P Command Port
4001 Set SMDR Port
4002 Set Agent Control Port
Set single digit voicemail access
6
code to 6 (used by MyCalls Desktop)
LAN Enable P Command Output
8 Digit Enable 8 Digit P Command Output
LAN Set SMDR Output for LAN
Set Various SMDR options for
-
MyCalls.
Enable Enable SMDR Ouput for all trunks.
Disable On-Hook transfer, used for
Disable
MyCalls desktop.
Enable SMDR output for all
Enable
extensions
Enable Enable Internal SMDR (outbound)
Enable Enable Internal SMDR (inbound)
13 | P a g e