NEC Univerge SV9100 Installation Manual page 42

Before the upgrade can take place, the licenses should be installed on the SV9100, read in using the
MyCalls license manager and registered on the Kelmar website. To verify that the upgrade can take
place, click the Help / Upgrade requirements option in the MyCalls application.
If the requirement for upgrading is satisfied then in the Help / Upgrade requirements menu will return
to following message. The window will tell you if you can upgrade a single version or more than one
version.
Should there be any items missing from the licenses then the following screen will be displayed
showing you what license items are installed so you can work out what is required in order for the
upgrade to be allowed.
If the upgrade requirements have not been met and MyCalls is un-installed, you will not be able to
install a new version, it will halt during the install. To apply the upgrade licenses, the original version
of MyCalls will have to be re-installed to allow the licenses to be installed.
42 | P a g e