Send A Distress Call - NorthStar NS100 Reference Manual

Quickstart guide and reference manual
Hide thumbs Also See for Northstar NS100:
Table of Contents

Advertisement

Send a distress call

DISTRES CALL
DISTRES CALL
>UNDEFINED
>FIRE
FIRE
HOLD DISTRES
FLOODING
3 SECONDS
If you hold down
1. Lift up the protective hinged cover from the
DISTRESS, an
UNDEFINED distress
call is transmitted
2. Press DISTRESS to show the following
automatically after
a three second
countdown.
3. Scroll to the category that best describes
Reference Manual
DISTRES CALL
SENT! WAIT
PRESS ESC
TO CANCEL
red DISTRESS button, located on the right
hand side of the handset.
distress categories on the LCD screen. Note
that only four categories can be shown at
any one time so use ^CH/SEL to scroll up
and CH/SELv to scroll down.
UNDEFINED
FIRE
FLOODING
COLLISON
GROUNDING
LISTING
SINKING
ADRIFT
ABANDONING
PIRACY
OVERBOARD
your situation, then hold down >ENT
or DISTRESS until the distress signal is
transmitted at high power on CH70 at the
end of a three second countdown.
If CH70 is already busy, the distress signal
will override the existing transmission.
The distress call repeats randomly
every 3.5 to 4.5 minutes until a distress
acknowledgement is received from a Search
and Rescue authority or until you cancel the
distress call manually by pressing <ESC or
16/9.
After transmitting the distress call, the radio
beeps loudly for 2 minutes and waits for a
distress acknowledgement.
4. Press any key except <ESC or 16/9 if you
want to stop the beeps while waiting for the
distress acknowledgement. (Press <ESC or
16/9 only if you want to cancel the waiting
phase and move to CH16.)
5. The radio selects CH16 automatically so that
you can hear any incoming voice contacts
from the Search and Rescue authorities and/
or other vessels in your area.
51

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents