Enter Your Atis Id; Turn The Atis Functions On/Off - NorthStar NS100 Reference Manual

Enter your ATIS ID

LOCAL/DIST DSC SETUP
USA/INT/CAN LL REPLY
GPS/DATA DSC FUNC
>DSC SETUP >ATIS ID
If you are navigating inland waterways within
WARNING!
Europe, you must enter your ATIS ID to access
This is a once-only
ATIS functionality. ATIS will send a digital signal
operation. You can anytime you release the PTT key.
display and read your
1. Select DSC SETUP and press >ENT.
ATIS ID at any time,
but you only get one
2. Move the cursor to ATIS ID and press >ENT.
opportunity to store it
in the radio. You cannot
change it after you
have stored it.
3. Enter the rest of your ATIS ID numbers along

Turn the ATIS functions on/off

LOCAL/DIST DSC SETUP
USA/INT/CAN DSC FUNC
GPS/DATA ATIS ID
>DSC SETUP >ATIS FUNC
Inland waterways rules
1. Select DSC SETUP and press >ENT.
require 1W Tx power
2. Move the cursor to ATIS FUNC and press
on channels 06, 08, 10,
11, 12, 13, 14, 15, 17,
71, 72, 74, and 77.
3. Press >ENT again if you want to turn the
36
INPUT USER 987654321
ATIS ID ATIS ID
9________ ENT>STORE
ESC>CANCEL
If this is the fi rst time that you are entering
your ATIS ID, a dashed line appears with 9
shown as the fi rst number. Note that an ATIS
ID always starts with 9.
the dashed line. The cursor automatically
moves to the next space after you enter each
number.
ATIS FUNC
>ON
OFF
>ENT.
ATIS functions ON and the ATIS symbol will
appear on the LCD screen to confi rm that
your vessel has ATIS functionality,
USERATISID 987654321
INPUT AGAIN ATIS ID
_________ ENT>STORE
ESC>CANCEL
If you make an error, press <ESC to clear all
the numbers you have entered so far and
return to the DSC SETUP menu, so that you
can start again.
4. When you have entered your ATIS ID
correctly, press >ENT.
5. You must reenter your ATIS ID again as a
check, then press >ENT again to permanently
store your ATIS ID in the radio.
You can view your ATIS ID any time by
selecting ATIS ID in the DSC SETUP menu.
OR
move the cursor to OFF and then press <ENT
to turn ATIS functionality OFF.
NOTE: It is not possible to have ATIS and DSC
operating simultaneously. When you turn one
ON, the other will turn OFF. If they are both off,
you must turn on DSC to get DSC functionality.
Northstar NS100