Show Or Hide The Boat's Position; Gps Alert Setting - NorthStar NS100 Reference Manual

Show or hide the boat's position

BUDDY LIST GPS/DATA
LOCAL/DIST MANUAL
USA/INT/CAN >SETTING
>GPS/DATA
If you have entered the boat's position
manually (see Reference Section 1 - Set your
position and time manually), the position is
always shown on the screen with the prefi x
MAN.
However, if the boat's position is being updated
through a GPS navigation receiver, you can
show or hide the boat's position on the LCD
screen.
1. Move the cursor to GPS/DATA and press

GPS alert setting

BUDDY LIST GPS/DATA
LOCAL/DIST MANUAL
USA/INT/CAN >SETTING
>GPS/DATA
The GPS alert is usually set to ON so that if
the GPS navigation receiver is disconnected,
warning alarm beeps sound.
1. Move the cursor to GPS/DATA and press
2. Move the cursor to SETTING and press
26
SETTING LL DISPLAY
>ON
TIME FORMAT
OFF
TIME DISPLY
>LL DISPLAY
>ENT.
GPS ALERT
SETTING
>ON
TIME DISPLY
OFF
LL DISPLAY
>GPS ALERT
>ENT.
>ENT.
2. Move the cursor to SETTING and press
>ENT.
3. Scroll through the GPS/DATA menu to LL
DISPLAY and press >ENT again.
4. Press >ENT again to have the LCD screen
show the boat's position
OR
move the cursor to OFF and then press <ENT
if you want to hide the boat's position.
3. Scroll through the GPS/DATA menu to GPS
ALERT and press >ENT again.
4. Press >ENT again to have the GPS alert ON
OR
move the cursor to OFF and then press <ENT
to turn it off.
Northstar NS100