How To Set The Time Or A Duration; Displaying Times/Durations; When The Time/Duration Has Elapsed - Miele TX3587 Operating And Installation Instructions

How to set the time or a
duration
Times are set in segments:
– For the time of day and cooking
durations, first the hours, then the
minutes.
– For the minute minder, first the
minutes, then the seconds.
^ Press OK.
Depending on the position of the
function selector, the functions (N, T,
S or +) will appear.
^ Highlight the required function using
V or W.
The corresponding symbol flashes for
approx. 15 seconds.
^ Press OK while the symbol is
flashing.
The function is selected and the left
numeric block will start to flash.
You can only set the time/duration
while the numeric block is flashing. If
the symbol has stopped flashing, you
will need to select the function again.
^ Set the required value using V or W.
^ Press OK.
The right numeric block will start to
flash.
^ Set the required value using V or W.
^ Press OK.
Your time/duration setting is now saved.

Displaying times/durations

If you have set times, the symbols N
and T or S indicate which time
functions have been set.
If you are using the minute minder N,
cooking duration T and end of
cooking time S functions
simultaneously, the last selected time
will be displayed.
If you have selected a cooking
duration, the time of day cannot be
displayed.

When the time/duration has elapsed

– the relevant symbol will flash,
– a buzzer will sound, if this option is
selected (see "Clock/timer -
Changing settings").
^ Press OK.
The buzzer will stop and the symbols in
the display will go out.
Clock/Timer
39