Pyrolytic Cleaning ^ Of The Oven Interior; Before Running The Pyrolytic Cleaning Programme - Miele TX3587 Operating And Installation Instructions

Pyrolytic cleaning ^ of the
oven interior
Instead of cleaning the oven by hand,
you can run the Pyrolytic cleaning
programme ^.
During the Pyrolytic cleaning
programme the oven interior is heated
up to over 430 °C. Any residual soiling
is broken down and reduced to ash by
the high temperatures.
This oven has three levels of pyrolytic
cleaning, each with a different duration.
Select:
– Level 1 for light soiling
– Level 2 for heavier soiling
– Level 3 for very heavy soiling
For safety reasons, the oven door is
automatically locked at the beginning of
the Pyrolytic cleaning programme.
It cannot be opened until the
programme has finished.
The timer can be used to delay the start
time of the Pyrolytic cleaning
programme, for instance to make use of
cheaper electricity tariffs.
At the end of the Pyrolytic cleaning
programme any residues such as ash
from the pyrolytic process can be easily
wiped away.
Cleaning and care
Before running the Pyrolytic cleaning
programme
Remove all accessories from the
oven, including the shelf runners
and any extra accessories such as
FlexiClip telescopic runners, before
starting the Pyrolytic cleaning
programme.
The high temperatures needed for
pyrolysis will damage them.
^ Take the shelf runners out (see
"Cleaning and care – Removing the
shelf runners with the FlexiClip
telescopic runners") and .remove any
other accessories from the oven
cavity.
If not removed, coarse soiling can
smoke and cause the Pyrolytic
cleaning programme to switch itself
off.
^ Coarse soiling should be removed
before running the Pyrolytic cleaning
programme.
75