Accessories; Repairs; Cleaning Contamination From The Filter; Register Online - DeWalt DCGG571 Instruction Manual

Cleaning Contamination from the Filter (Fig. 2, 13)
Should the grease gun fail to dispense FIG. 13
grease, clean the filter (V).
NOTE: If there is still grease in the tube,
open the purge valve prior to pulling the
tube handle.
1. Pull the grease tube handle (L) out
as far as it will go, then secure
the grease tube rod (M) into the
retaining slot (O) by moving the rod
to the side. Ensure the rod is placed
securely in the slot to prevent it from
disengaging.
2. Unscrew the grease tube assembly (N) from the grease gun and
remove.
3. Using a small flat-blade screwdriver or pick, carefully pop out the
filter.
4. Wipe off the filter using a soft cloth. If the filter still has debris in it
after wiping, a soft brush or swab may be used.
5. Once clean, reinsert the filter into the round groove, ensuring it is
fully seated, and reattach the grease tube assembly to the grease
gun.
Accessories
i_ WARNING: Since accessories, otherthan those offered by DEWALT,
have not been tested with this product, use of such accessories with
this tool could be hazardous. To reduce the risk of injury, only DEWALT
recommended accessories should be used with this product.
i_WARNING: Extreme pressure may cause nozzle extension or
flexible hose to burst. Use only DEWALT approved hoses and follow
flexible hose instructions and warnings.
16
Recommended accessories for use with your tool are available at
extra cost from your local dealer or authorized service center. If you
need assistance in locating any accessory, please contact DEWALT
Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286, call
1-800-4-DEWALT (1-800-433-9258) or visit our website: www.dewalt.
com.
ACCESSORIES
DCGG5701
DCGG5701-3
DCGG5702
DCGG5703-42
DCGG5703-24
DCGG5704
1/8" NPT Grease Gun Coupler
1/8" NPT Grease Gun Coupler 3-pak
Right Angle Grease Gun Coupler
1/8" N PT Grease Gun Hose Assembly (42") (107 mm)
1/8" NPT Grease Gun Hose Assembly (24") (61 mm)
Clear Grease Gun Cartridge Tube
Repairs
The charger and battery pack are not serviceable.
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment (including brush inspection and replacement) should
be performed by a DEWALT factory service center, a DEWALT
authorized service center or other qualified service personnel. Always
use identical replacement parts.
Register Online
Thank you for your purchase. Register your product now for:
• WARRANTY SERVICE: Registering your product will help you
obtain more efficient warranty service in case there is a problem
with your product.
• CONFIRMATION OF OWNERSHIP: In case of an insurance
loss, such as fire, flood or theft, your registration of ownership will
serve as your proof of purchase.