Table of Contents
Advertisement
Combi Settings
The functions minute minder and Auto-
matic switch off can be operated at the
same time.
You have programmed one or more
switch off times and wish to use the
minute minder additionally:
Touch the m sensor until the indicator
lamp for the minute minder begins to
flash.
You use the minute minder and wish to
programme one or more switch off
times additionally:
Touch the m sensor until the indicator
lamp for the desired cooking zone
begins to flash.
Shortly after prgramming the last time
the display will change to the shortest
remaining time. If you wish to check the
times not shown, touch the m sensor
until the desired indicator lamp starts
flashing.
Starting with the shortest remaining
time, all activated cooking zones and
the minute minder will be shown in
clockwise direction.
Timer default setting
The timer is set at the factory so that it
starts with 01 or 99 when the + or -
sensor is touched.
This setting can be adjusted so that the
time you last used appears in the
display when you press + or - (see
"Programming - P4.").
Example:
If P4. is set to S1, and the last time the
minute minder was used it was used for
5 minutes, 00 will appear in the display
when you switch on. When you touch +
or -, the display will change to 05.
You can still select any time you want,
even if you have adjusted the timer
default setting.
Timer
33
Hide quick links:
Advertisement
Table of Contents
