Switching A Cooking Zone Off Automatically - Miele KM 5731 Operating And Installation Instructions

Timer
Switching a cooking zone off
automatically
It is only possible to programme
Automatoc swiitch-off for a cooking
zone if a power setting has already
been selected for that zone. All cooking
zones can be programmed at the same
time.
How to proceed:
^ Select a power setting for the desired
zone, e.g. rear right, in the usual way.
^ Touch the m sensor.
In the timer display 00 appears and the
indicator lamp for the minute minder
begins to flash.
^ Touch the m sensor again.
The indicator lamp for the minute
minder will go out and an indicator
lamp for a cooking zone will start
flashing.
^ If more than one cooking zone is
switched on, touch the m until the
indicator lamp for the desired
cooking zone starts flashing. e. g.
rear right.
The indicator lamps for the switched on
cooking zones will appear one after the
other clockwise from front left to front
right.
32
^ Touch the - oder + until the time you
require appears in the display, e.g.
15 minutes.
The time counts down in minutes. The
time remaining can be seen in the
display and altered at any time with - or
+.
If you wish to programme a further
cooking zone, proceed as described
before.
If more than one switch-off time is
programmed, the shortest remaining
time shows in the display, and the
indicator lamp for the corresponding
cooking zones flashes. The other
indicator lamps show static. If you wish
to check the times not shown, touch the
m sensor until the desired indicator
lamp starts flashing.