Windows 2000; Device Drivers - NEC Express5800 User Manual

Windows 2000

The EXPRESSBUILDER "Express Setup" feature provides an automated installation
procedure for Windows 2000. Refer to the EXPRESSBUILDER User's Guide included
on the EXPRESSBUILDER CDROM for information on running "Express Setup."
This section of Appendix C contains instructions needed to manually install and
configure hardware and software used with the Microsoft Windows
System. This information is intended to supplement the more detailed procedural
documents available from Microsoft. This information is not intended to be the central
source of installation and configuration information for your system. Read this entire
appendix along with Microsoft's Windows
installation process.
Note
information before attempting to install Windows 2000 Operating
System on your system.

Device Drivers

The drivers required for the devices listed in the table below are located on the
EXPRESSBUILDER CD that is included with your system. To create the required
diskettes, select "Tools" on the EXPRESSBUILDER CD menu.
Note
EXPRESSBUILDER CD make sure you use the drivers required for
the devices on your specific system.
Always read the information in the release notes or inserts, included
with any options for they supersede the information in this guide.
Supported Device
SCSI RAID
Controller
System Board
*Diskette generated from the NEC EXPRESSBUILDER CDROM
**Run this application from the EXPRESSBUILDER CDROM; diskette not required
C-2 Installing and Configuring Windows 2000 and Windows NT 4.0
: Read the System Release Notes for the latest system
: When creating the required diskettes from the
Required Driver Media*
Windows 2000 OEM Diskette*
Windows 2000 NEC Update Module**
®
2000 Setup procedures before starting the
®
2000 Operating