Disabling A Pin; Pin Unlock Key; Wan Settings; Mobile Networks - Motorola ET1 Integrator Manual

6 - 4 ET1 Enterprise Tablet Integrator Guide
Touch Set up SIM card lock.
2.
Touch Change SIM PIN.
3.
Touch the Old SIM PIN text box. In the keypad text field enter the old PIN and then touch Done.
4.
Touch OK.
5.
Touch the New SIM PIN text box. In the keypad text field enter the new PIN and then touch Done.
6.
Touch OK.
7.
Touch the Re-type new PIN text box. In the keypad text field enter the new PIN and then touch Done.
8.
Touch OK. SIM successfully changed.
9.

Disabling a PIN

To disable the use of a PIN:
Touch > Settings > Location & security settings.
1.
Touch Set up SIM card lock.
2.
Touch Lock SIM card.
3.
Touch the SIM PIN text box. In the keypad text field enter the PIN and then touch Done.
4.
Touch OK.
5.

PIN Unlock Key

A PIN Unlock Key (PUK) code is required to unlock SIM cards that have become locked following three
successive incorrect PIN entries. If the SIM card becomes locked, get a PUK code from the carrier to unlock
the SIM card.
Touch > Settings > Location & security settings.
1.
Touch Set up SIM card lock.
2.
Touch Enter SIM PUK.
3.
Touch the Enter SIM PUK text box. In the keypad text field enter the PUK code and then touch Done.
4.
Touch OK.
5.

WAN Settings

Mobile Networks

•
Data enabled - Uncheck to prevent the ET1N2 from transmitting data on any mobile network. This is
useful if traveling in an area where the user does not have a mobile data plan and wants to avoid charges
for data use on local carriers' mobile networks. Unchecking this setting does not prevent the ET1N2 from
transmitting data over WLAN.
•
Data roaming - Uncheck to prevent the ET1N2 from transmitting data on other carriers' mobile networks
when it can not access its own carrier's mobile networks.