Replacing The Cleaning Liquid - Panasonic ES-LV9N Operating Instructions Manual

►Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
►Attaching the outer foil section
After turning the foil frame mark (
securely attach the outer foil section to the shaver
until it clicks.
►Replacing the system outer foil
1. Press the system outer foil release buttons and
pull down the system outer foil.
2. Align the foil frame mark (
outer foil mark ( ) and securely attach
together until it clicks.
• Do not press the system outer foil release
buttons with excessive force.
Doing so may bend the system outer foil, preventing complete
attachment to the foil frame.
►Replacing the inner blades
1. Remove the inner blades one at a time.
2. Insert the inner blades one at a time.
Note
Do not throw away the foil frame.
) to the front,
) and the system

Replacing the cleaning liquid

If the STATUS lamp glows for 5 seconds when the SELECT button
is pressed, the cleaning liquid needs to be replaced.
• Even if the STATUS lamp does not light up, replace the cleaning
liquid after 6 months have passed.
1
Remove the AC adaptor and
remove the cleaning liquid unit.
(See page 9.)
2
Wash away the old cleaning
liquid.
• It can be drained as sewage.
3
Rinse the cleaning liquid unit.
• Pour water as illustrated while tilting the
cleaning liquid unit and shaking it gently.
• You can clean with the cleaning liquid filter
removed.
After washing, be sure to attach the cleaning
liquid filter.
4
Gently wipe off any beard
trimmings attached to the inside
of the cleaning tray (a) with a
cloth or tissue paper dampened
with water.
• Clean the corners and uneven parts of
the cleaning tray with a cotton swab
dampened with water.
5
Prepare the new cleaning liquid.
(See page 9.)
1

15