(8)
"Update Completed!!" is displayed at the bottom of the LCD screen after the updating is com-
pleted properly.
"Update Failed." is displayed at the bottom of the LCD screen when the updating is not com-
pleted properly. Turn OFF the power, and then check the following items. After confirming and
clearing the problems, restart updating from the beginning.
•
Is the download jig connected properly?
•
Is the updating data written to the download jig properly?
•
Do the download jig and the equipment operate properly?
© 2004 - 2010 TOSHIBA TEC CORPORATION All rights reserved
Fig. 6-14
Fig. 6-15
e-STUDIO200L/202L/203L/230/230L/232/233/280/282/283
6 - 15
FIRMWARE UPDATING
6